Honda V65 VF1100 Magna Sabre (Many other Bikes) SIGHT GLASS, like OEM
Rated 3.5/5 based on 11 customer reviews

Honda V65 VF1100 Magna Sabre (Many other Bikes) SIGHT GLASS, like OEM

Available: 43
$9.95

Honda V65 VF1100C Magna, VF1100S Sabre (And Many other Bikes) sight glass, like OEM.  This is a replacement sight glass which is like the OEM sight glass (actually plastic) and is sealed by an O-ring when pressed in, also like the original factory installation.  These are not difficult to install but you will need a way to press it into the bore, a small c-clamp works well.  No sealant is required as it is the compression of the O-ring that is the seal, which is like most oem installs.

Note: I have another listing for qty 2 if you need a pair of these, price is less for a pair.

I have no doubt this will fit many brake master cylinders, clutch master cylinders etc, so I have listed the bore dimensions below so you can measure for your application.  I am sure it will fit some Yamaha's, Suzuki's, Kawasaki's and more.

The bore ID that these will press into is .7115 inches or 18.08mm

The depth of this bore is .2170 inches or 5.51mm

There is no lip on these so if your depth is greater, in will just go in further.

Thanks

Customer Confirmed Fit:

It's official! This product fit perfectly into my clutch master cylinder.
My bike is a 1982 Honda V45 Sabre VF750. This is the original master cylinder on the bike. It also looks like a good fit for the front brake master cylinder. Thank you for all the email support and willingness to take it back including return shipping! I gave you the best feedback I could in the short space they give me. All the best, 

 



Honda V65 VF1100C Magna, VF1100S Sabre (And Many other Bikes) sight glass, like OEM.  This is a replacement sight glass which is like the OEM sight glass (actually plastic) and is sealed by an O-ring when pressed in, also like the original factory installation.  These are not difficult to install but you will need a way to press it into the bore, a small c-clamp works well.  No sealant is required as it is the compression of the O-ring that is the seal, which is like most oem installs.

Note: I have another listing for qty 2 if you need a pair of these, price is less for a pair.

I have no doubt this will fit many brake master cylinders, clutch master cylinders etc, so I have listed the bore dimensions below so you can measure for your application.  I am sure it will fit some Yamaha's, Suzuki's, Kawasaki's and more.

The bore ID that these will press into is .7115 inches or 18.08mm

The depth of this bore is .2170 inches or 5.51mm

There is no lip on these so if your depth is greater, in will just go in further.

Thanks

Customer Confirmed Fit:

It's official! This product fit perfectly into my clutch master cylinder.
My bike is a 1982 Honda V45 Sabre VF750. This is the original master cylinder on the bike. It also looks like a good fit for the front brake master cylinder. Thank you for all the email support and willingness to take it back including return shipping! I gave you the best feedback I could in the short space they give me. All the best, 

 



SHIPPING:

ALL overhauled water pumps and kits ship to the lower 48 by USPS priority mail.  Likewise, small parts, NOS, New and even many used parts will also ship for free. 

MISC. ITEMS CATEGORY:

Misc. items are non-Honda related.  Some do have free shipping, and some do not.  The larger items generally do not include shipping. We will work with you on any of these items, please contact us for information.

INTERNATIONAL SHIPPING:

Please contact us prior to purchase with your location. The cost of shipping will be the actual cost. No handling or other fees apply.  We are working on our site to include these fees.

SHIPMENT PROCESSING TIME:

Almost all items are shipped within 24 hours, except weekends.  

RETURNS:

Anything we sell can be returned, no problem, but these are our requirements.  Part(s) can not have been installed, damaged or have original packaging missing.  We inspect ALL parts prior to shipping and often take more photos.  We must be able to relist it to sell again to others.  Shipping costs us, so it will be deducted from the refund.  We charge NO restocking fees etc.  We request you be honest about returns and ask questions before your purchase if not positive the part will fit or work for you.  We are always willing to help with part fit and applicability etc.

 

OVERHAULED WATER PUMPS:

The advantage of having us overhaul your pump, or purchasing an overhauled pump from us, is that we will give you a lifetime warranty.  If the pump ever leaks at the weep hole, we will repair it and ship back to you at no charge.  This does NOT cover the cost of removing the pump, shipping back to us or ANY misc. damage.  Do remember it is up to you to maintain the cooling system in particularly good working order and always use distilled water when mixing with antifreeze.  This warranty is subject to the condition of the returned pump.

WATER PUMP KITS:

The parts of these kits have a warranty and if defects are found before you start your overhaul, we will work with you for sure.  We provide detailed instructions with our kits and if follow very closely you should have no problems.  NOTE: This process does require a hydraulic press as well as an assortment of tools to use with the press.  I usually send instructions just prior to shipping the kit, so if you read them and decide it is not something you want to tackle, let us know before we ship the kit.

NEW, NOS AND OTHER HONDA PARTS:

If any part(s) that you purchase are defective or not as described, please contact us with a photo if possible. We are not liable for any damage caused by shipping.

USED PARTS:

All used parts are sold as is and please be advised to inspect the photos carefully. Please contact us for any additional information or details of the product before purchasing. More info does not apply to the "lots" we have for sale as these products are already packaged for shipment.